Shenzhen Weichat Technology Co., Ltd.


Contact Us

You are here:Home >> Products >> Panel Mount Waterproof Wir...

Panel Mount Waterproof Wire Connector

EW-P23MP no screw panel connector with dust cap cable quick splice

 Number of Poles   2Pin       3Pin    
 Rated Voltage  450V  450V
 Rated Current  16A  16A
 Wire Section   0.5-2.5mm²
 Outer Cable Diameter   5-9mm, 9-12mm
 Mating Cycle   1500 Mating Cycles
 Temperature Range   -40℃-+105℃
 IP Code   IP68
 Housing Material   PA66
 Contact/Terminal Materials   Copper Alloy
  Installation   Panel Mounting
    ✔ IP68 Panel Mount wire board Discrete Wire Cable Connector Terminal Cap ✔Cross section wire to board panel mounting connector wire Clamp ✔Cap Head Plug Panel Mount connector Socket Wire-Board-Wire

    We all know that equipment is made up of various parts and components. There are more and less parts of different products. If you look closely, you will find connectors in many electrical products. The application patterns of connectors in these electronic products can be broadly divided into the following categories

    wire-to-wire connector 

    Wire-to-wire means that there are wires attached to both ends of the connector. According to different outlet ports, it can be divided into 1 in 1 out connectors, 1 in 2 out connectors, and 1 in 3 out connectors. The 1 in 1 out connector is mostly emerged as the I shaped connector or straight connector. The 1 in 2 out connector is more of T connector, or Y connector. The 1 in 3 out connector is the typical X shape cross connector.

    wire-to-board connector

    A wire-to-board connector is a connector that secures wires to a panel. One end of the connector is the wire, and the other end is the panel, such as the shell of the product, the panel, the bulkhead, etc., and possibly the internal PCB board. Depending on the fixed way. It can also be further divided into bulkhead fixed connector and non-bulkhead fixed connector.

    box shape connector

    Box-type connector is a component that uses box-shaped containers as cable connections. All cables are collected inside the connector and connected internally according to the wiring rules that meet safety standards.

    The EW-P23P is a quick splicing wire-to-board connector.Panel mount connectors have a wide application, ranging from lighting fixtures to advertising screen, from solar system to communication equipment , and from medical equipment to mechanical automation,etc .

    From wide operating temperature to high level waterproof rating ,EW-P23MP panel mount connector has more noticeable features than the average connector,particularly for harsh environment.

    Portable wire crimp design.One of the main advantages of EW-P26MP wire crimp panel connector is that it adopt crimping to splice wire You don‘t need a screwdriver or a soldering iron, just insert the stripped conductor and clamp it.

    IP68 waterproof protection.Outdoor environment or waterside where is wet can select this waterproof panel connector as the cable connection mode without concerns. because its waterproof level reaches IP68 grade.

    wide working temperature. this male female butting panel connector can work at a wide working temperature -40℃~+105℃,which has covered almost all extreme temperature, allowing your device not to compromise with the ambient temperature.

    dust cap optional. Whether to choose a dust cap depends on your needs. The dustproof cap prepared for the panel connector not only can avoid collision during connectors transportation, but also protect the terminal from environmental influence and rust when exposed to the air.

    Snap-on Connector Wire-To-Board Connector with Dust Cap Outline Drawing


    Please submit your basic information, we will contact you as soon as possible!





Related products

Copyright © 2019 Shenzhen Weichat Technology Co., Ltd. All Rights Reserved.