Shenzhen Weichat Technology Co., Ltd.

Products

Contact Us

You are here:Home >> Products >> quick plug screw locked waterp...

quick plug screw locked waterproof connector

EW-M20T 2Pin 3Pin T shaped screw locked waterproof connector


  Number of Poles   2/3Pin
  Rated Voltage   400V
  Rated Current   24A
  Wire Section   0.5-2.5mm²
  Outer Cable Diameter   5-9mm,9-12mm          
  Temperature Range   -40℃-+105℃
  IP Code   IP68
  Housing Materials   PA66
  Contact/Terminal Material   Copper Alloy
    ✔Cable Connector LED Install T Connector Wire Junction Outdoor Workable ✔Sealed IP68 3 Way Lighting Wire Cable Connector 9-12mm Cable Compatible ✔Electronic Cable Connectors 2P 3P Screw Clamp Cable Junction 400V 24A




    The connecting head of our connector,made of nylon PA66 material, is of good quality and high strength. The forces generated by the crimping screws on the screw tightening connector mainly act on the contact parts and little force transfer,so there is absolutely no need to worry about the tightening pressure fracturing the connecting head and loosening the connection.
                   


    ● 400V voltage connector -Supports up to 400V high voltage and 2500V withstand voltage.

    ● 24A power cable connector- Up to a 24A rated current for AC and DC Support.

    ● Connector Certifications-CE approved connector,SAA listed connector,TUV certified connector,UL approved connector,ROHS certified connector,CQC approved connector.

    ● Specialized connector factory-Waterproof connector factory supply with own R&D team and production equipment.

    ● Screw type IP68 connector -T shape connector for 1 in 2 out cable wiring application.

    ● Multi Pins connector- 2 Pin cable connector, 3 Pin cable connector for options.

    ● Connector water proof standard-up to IP68 waterproof level, outdoors, wet location  underground available.

              IP68 connector 1 in 2 out connector wire connector

    2-3P 24A connector Screwed Connector Outline Drawing
                  



    Following are two T-connector typical applications. T shaped IP68 connectors can be regarded as 1-in-2-out connectors or 2-in-1-out connectors. The 3 way screwed connector that is jointed to the two led drivers  is  the 1 in 2 out connector we mention above. the mains power go through the waterproof 3 wire connector connecting to LED driver and then was converted into low constant voltage or low constant current powered the lamps.

                              
    The black rectangular box is the controller of the lamp, which is respectively connected to the leading-out lines of two LED drivers. The main function is to realize the unified control of both ends of the lamp by a controller. In terms of connecting,It is the opposite of the connector we mentioned above that connects to the mains. Which, of course, shows that there is no difference between the inlet and outlet of our three-wire connector. Either end can be used as the cable inlet, the remaining two ends as the cable outlet.

    Above is the connection means of single lamps and lanterns. So how do you connect multiple lights? How does it realize the unified control of all lamps? This is clearly illustrated in the following picture. From this you can also roughly calculate how many 3-cable connectors you need for your lighting project.

                            
    The unified control of multiple lamps and lanterns is through connecting controllers by the network cables, so as to achieve overall interconnection. In addition to the 3-wire connectors described above, we also provide 1-in-1-out connectors (wired to wire connector) and 4-wire X shaped connectors. Portable male-female connectors are also provided.

                 lighting cable connector IP68 waterproof connector
    Please submit your basic information, we will contact you as soon as possible!

    *

    *

    *

    *

Related products

Copyright © 2019 Shenzhen Weichat Technology Co., Ltd. All Rights Reserved.